Factory Electrician

Belgotex Floors

Location
Pietermaritzburg, KwaZulu-Natal
Minimum qualification
Certificate / N-level / trade
Closing date

First listed . Last checked at source .

In brief

Overview This is a description for a Factory Electrician role at Belgotex Floors. The position is responsible for ensuring electrical safety and compliance, performing planned and preventive maintenance, responding to breakdowns and fault finding, executing electrical installations and improvements, managing maintenance control and resources, and providing teamwork and technical support within a manufacturing environment. What you will do * Apply lockout, tagout, test-for-dead and permit-to-work requirements before starting electrical work. * Inspect work areas, identify hazards, and use prescribed PPE and test instruments. * Stop and report unsafe equipment and immediate risks. * Maintain panel access, covers, labels, earthing, guarding, and electrical housekeeping. * Complete statutory and internal electrical inspections and record defects/corrective actions. * Follow site emergency, fire prevention, environmental, and incident-reporting procedures. * Complete scheduled electrical maintenance on textile production machinery, motors, drives, control panels, conveyors, pumps, fans, compressors, heating systems, utility equipment, and building services. * Inspect and test cables, terminations, contactors, overloads, isolators, protective devices, sensors, switches, solenoids, power supplies, and control circuits. * Identify developing defects such as overheating, loose connections, insulation damage, nuisance tripping, abnormal current draw, and deteriorating components. * Plan work with the Electrical Foreman and production teams for completion during agreed stoppages and shutdowns. * Record findings, parts used, labour time, follow-up work, and equipment condition in the maintenance management system. * Respond promptly to electrical breakdowns and obtain clear fault information. * Use electrical drawings, test equipment, alarms, drive diagnostics, and PLC input/output status to locate faults systematically. * Repair or replace defective components, complete functional and safety tests, and confirm equipment safety before handover. * Escalate complex control, automation, or instrumentation faults to specialists, providing accurate diagnostic information. * Investigate recurring failures, identify underlying causes, and implement/recommend corrective action. * Communicate progress, expected restoration time, residual risk, and follow-up work to relevant personnel. * Install and modify motors, isolators, distribution equipment, cable routes, control panels, lighting, field devices, and associated wiring according to approved drawings. * Support testing and commissioning of new or modified equipment, including rotation checks, protection checks, interlock tests, and safe start-up. * Do not make unauthorized changes to PLC programs, safety circuits, protection settings, or machine interlocks. * Mark up drawings and provide accurate information for updates to schematics, cable schedules, equipment registers, and maintenance plans. * Identify opportunities to improve reliability, energy use, maintainability, and electrical safety, submitting recommendations through change control. * Create, update, and close work orders with clear fault descriptions, actions taken, parts used, and further work required. * Check critical electrical spares and advise the Electrical Foreman on stock levels, obsolescence, or lead times affecting operational risk. * Keep tools, meters, test leads, ladders, and portable equipment secure, serviceable, and within calibration/inspection dates. * Maintain a clean work area, removing waste after every task. * Participate in maintenance planning, shift handovers, toolbox talks, risk assessments, and post-breakdown reviews. * Work constructively with production operators, artisans, technicians, contractors, and engineers to diagnose and resolve equipment problems. * Give clear shift handovers covering outstanding defects, isolated equipment, temporary controls, parts required, and work in progress. * Provide task guidance to electrical assistants and apprentices within limits of competence. * Monitor contractors on assigned electrical tasks and report unsafe work, poor workmanship, or deviation from scope. * Share technical knowledge and lessons from failures to improve team capability and prevent recurrence. Requirements (from the original advert) * Matric with Mathematics and Physical Sciences * Recognized Electrician Trade Test certificate * Five to ten years of post-trade industrial electrical maintenance experience in a manufacturing or process environment * Practical experience with three-phase systems, motors, motor control, switchgear, variable speed drives, control circuits and industrial distribution * Ability to diagnose electrical and control faults methodically using drawings, meters, alarms and equipment diagnostics * Ability to read and interpret electrical schematics, single-line diagrams, panel layouts, manuals and equipment specifications * Working knowledge of maintenance management systems, electronic work orders and standard office software * Willingness to work shifts, standby, call outs, weekends and planned shutdowns when rostered Who should apply The ideal candidate should possess a Matric certificate with Mathematics and Physical Sciences, along with a recognized Electrician Trade Test certificate. They should have extensive (5-10 years) post-trade experience in industrial electrical maintenance within a manufacturing or process setting, demonstrating practical expertise with three-phase systems, motors, motor control, switchgear, variable speed drives, control circuits, and industrial distribution. Applicants must be adept at methodically diagnosing electrical and control faults using various diagnostic tools and be able to interpret technical electrical documentation. A working knowledge of maintenance management systems, electronic work orders, and standard office software is required. Furthermore, the role demands a willingness to work varied hours including shifts, standby, call-outs, weekends, and planned shutdowns. Ideal candidates will also demonstrate strong work standards, initiative, excellent planning and organizing skills, a commitment to continuous learning, and an ability to work effectively with diverse individuals. Deadline Not specified Reference Original posting: https://www.myjobmag.co.za/job/factory-electrician-belgotex-floors-1 Source: myjobmag

Summary drafted with AI assistance from the original advert. The advert itself is the authority — how we use AI.

Job description

Key Accountabilities and Outputs: Electrical Safety and Compliance * Apply lockout, tagout, test-for-dead and permit-to-work requirements before starting electrical work. * Inspect the work area, identify hazards and use the prescribed personal protective equipment and test instruments. * Stop and report unsafe equipment, damaged protection devices, exposed conductors, bypassed interlocks and other immediate risks. * Maintain panel access, covers, labels, earthing, guarding and electrical housekeeping to the required standard. * Complete statutory and internal electrical inspections assigned to the role and record all defects and corrective actions. * Follow site emergency, fire prevention, environmental and incident-reporting procedures. Planned and Preventive Maintenance * Complete scheduled electrical maintenance on textile production machinery, motors, drives, control panels, conveyors, pumps, fans, compressors, heating systems, utility equipment and building services. * Inspect and test cables, terminations, contactors, overloads, isolators, protective devices, sensors, switches, solenoids, power supplies and control circuits. * Identify developing defects such as overheating, loose connections, insulation damage, nuisance tripping, abnormal current draw and deteriorating components. * Plan work with the Electrical Foreman and production teams so that maintenance is completed during agreed stoppages and shutdowns. * Record findings, parts used, labour time, follow-up work and equipment condition in the maintenance management system. Breakdown Response and Fault Finding * Respond promptly to electrical breakdowns and obtain clear information about the fault, operating conditions and production impact. * Use electrical drawings, test equipment, alarms, drive diagnostics and programmable logic controller input and output status to locate faults systematically. * Repair or replace defective components, complete functional and safety tests, and confirm that the equipment is safe before handover to production. * Escalate complex control, automation or instrumentation faults to the appropriate specialist and provide accurate diagnostic information. * Investigate recurring failures, identify the underlying cause and implement or recommend corrective action rather than relying on temporary repairs. * Communicate progress, expected restoration time, residual risk and follow-up work to the Electrical Foreman and affected production personnel. Electrical Installations and Improvements * Install and modify motors, isolators, distribution equipment, cable routes, control panels, lighting, field devices and associated wiring in accordance with approved drawings and specifications. * Support the testing and commissioning of new or modified equipment, including rotation checks, protection checks, interlock tests and safe start-up. * Do not make unauthorized changes to programmable logic controller programs, safety circuits, protection settings or machine interlocks. * Mark up drawings and provide accurate information for updates to schematics, cable schedules, equipment registers and maintenance plans. * Identify practical opportunities to improve reliability, energy use, maintainability and electrical safety, and submit recommendations through the agreed change-control process. Maintenance Control and Resources * Create, update and close work orders with a clear description of the fault, action taken, parts used and further work required. * Check critical electrical spares and advise the Electrical Foreman when stock levels, obsolescence or lead times could create operational risk. * Keep tools, meters, test leads, ladders and portable equipment secure, serviceable and within required calibration or inspection dates. * Maintain a clean work area and remove waste, redundant cables, packaging and replaced components after every task. * Participate in maintenance planning, shift handovers, toolbox talks, risk assessments and post-breakdown reviews. Teamwork and Technical Support * Work constructively with production operators, artisans, technicians, contractors and engineers to diagnose and resolve equipment problems. * Give clear shift handovers covering outstanding defects, isolated equipment, temporary controls, parts required and work still in progress. * Provide task guidance to electrical assistants and apprentices within the limits of competence and delegated authority. * Monitor contractors working on assigned electrical tasks and immediately report unsafe work, poor workmanship or deviation from scope. * Share technical knowledge and lessons from failures to improve team capability and prevent recurrence. Requirements * Matric with Mathematics and Physical Sciences * Recognized Electrician Trade Test certificate * Five to ten years of post-trade industrial electrical maintenance experience in a manufacturing or process environment * Practical experience with three-phase systems, motors, motor control, switchgear, variable speed drives, control circuits and industrial distribution * Ability to diagnose electrical and control faults methodically using drawings, meters, alarms and equipment diagnostics * Ability to read and interpret electrical schematics, single-line diagrams, panel layouts, manuals and equipment specifications * Working knowledge of maintenance management systems, electronic work orders and standard office software * Willingness to work shifts, standby, call outs, weekends and planned shutdowns when rostered Competencies: Individual Contributor * Valuing Differences - Working effectively with individuals of diverse cultures, interpersonal styles, abilities, motivations, or backgrounds; seeks out and uses unique abilities, insights, and ideas from diverse individuals. * Work standards - Setting high standards of performance for self and others; assuming responsibility and accountability for successfully completing assignments or tasks; self-imposing standards of excellence rather than having standards imposed. * Initiating Action - Taking prompt action to accomplish work goals; taking action to achieve results beyond what is required; being proactive. * Planning and Organising - Establishing an action plan for self and others to complete work efficiently and on time by setting priorities, establishing timelines, and leveraging resources. * Continuous Learning - Actively identifying new areas for learning; regularly creating and taking advantage of learning opportunities; using newly gained knowledge and skill on the job and learning through their application

Before you apply

  • Confirm the requirements and closing date on the original listing (myjobmag). SPANi lists vacancies from other sites and may not reflect last-minute changes.
  • Legitimate employers do not charge application, registration or training fees.
  • Don't send your ID or bank details before you have confirmed the employer is real.

How to spot a job scam

Before you apply

  • Read the full advert and confirm you meet the minimum requirements before applying.
  • Tailor your CV headline and most recent experience to the job title and key skills.
  • Note the closing date and reference number, and keep a copy of what you submit.
  • Apply only through the employer or job board link — never pay to apply.

Similar roles

PermanentSkilled Trades & Artisans

Quality Controller

Hire ResolvePietermaritzburg, KwaZulu-Natal

A Speciality Chemical Manufacturing organisation specialising in natural extracts and industrial applications is seeking an experienced Quality Controller.

PermanentSkilled Trades & Artisans

Field Service Technician

Trade Link Retail SystemsRichards Bay, KwaZulu-NatalMarket related

We are seeking experienced IT Field Consultants to provide onsite technical support to clients across South Africa. Install, configure, maintain, and troubleshoot POS systems, servers, PCs, printers, networks, and related hardware. Diagnose and resolve hardware and software issues within client environments.

PermanentSkilled Trades & Artisans

Machinist

Talent CandeyPinetown, KwaZulu-Natal

Our Packaging Manufacturing Client is currently recruiting for a Machinist to join their team based in Pinetown. The Fitter & Turner / Machinist will be responsible for manufacturing, repairing, and maintaining mechanical components and machinery within the production environment.

Get new skilled trades & artisans jobs in kwazulu-natal by email

Free. No account needed. Unsubscribe with one click.

We only use your email to send this alert. See our privacy policy.